Desiccant dryer
BEKO Technologies XCe 80
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- 80 SCFM≈ 136 m³/h
- Dew point
- -40 °C (-40 °F)As published: -40 °F
- ISO 8573-1 class
- Class 2 (derived)
- Type
- Heatless
- Manufacturer
- BEKO Technologies
- Line
- DRYPOINT XCe
- Voltage
- 120 VAC
- Frequency
- 50 Hz · 60 Hz
- Brochure market
- North America
- CSA
- cULus (controller)
- CRN
- n/a
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| Mikropor MDA 130 | 80 SCFM130 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
| Sullivan-Palatek SPDP 80 | 80 SCFM≈ 136 m³/h | -40 °C (-40 °F) | Class 2 (derived) | North America |
| Van Air Systems HLSXG-80 | 80 SCFM≈ 136 m³/h | -40 °C (-40 °F) | Class 2 (derived) | North America |
| Hankison HHL 141 | ≈ 82 SCFM140 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
| Hertz Kompressoren HDA 130 | 77 SCFM130.2 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
| Pneumatech PH 90 HE | ≈ 85 SCFM144 m³/h | -40 °C (-40 °F) | Class 2 (derived) | Worldwide |
| Altec AIR HLD-0075-1 | 75 SCFM≈ 127 m³/h | -73 °C (-99.4 °F) | Class 1 | North America |
| Atlas Copco CD 40+ | 85 SCFM144 m³/h | -40 °C (-40 °F) | Class 2 | Worldwide |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other DRYPOINT XCe models
Is your product missing?
Request received. We will proceed within 72 hours.