Desiccant dryer
BEKO Technologies XCe 160
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- 160 SCFM≈ 272 m³/h
- Dew point
- -40 °C (-40 °F)As published: -40 °F
- ISO 8573-1 class
- Class 2 (derived)
- Type
- Heatless
- Manufacturer
- BEKO Technologies
- Line
- DRYPOINT XCe
- Voltage
- 120 VAC
- Frequency
- 50 Hz · 60 Hz
- Brochure market
- North America
- CSA
- cULus (controller)
- CRN
- n/a
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| Champion XCHL160 | 160 SCFM270 m³/h | -73 °C (-99.4 °F) | Class 1 | North America |
| Gardner Denver XGHL160 | 160 SCFM270 m³/h | -73 °C (-99.4 °F) | Class 1 | North America |
| Ingersoll Rand HL160 | 160 SCFM270 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | North America |
| Sullivan-Palatek SPDP 160 | 160 SCFM≈ 272 m³/h | -40 °C (-40 °F) | Class 2 (derived) | North America |
| ZEKS 160ZPB | 160 SCFM≈ 272 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 | North America |
| Hankison HHL 271 | ≈ 159 SCFM270 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
| OMI HLA 275 Pro | 162 SCFM275 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | Worldwide |
| Kaeser KAD 165 | 165 SCFM≈ 280 m³/h | -70 to -20 °C (-94 to -4 °F) | Classes 1, 2, 3 | North America |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other DRYPOINT XCe models
Is your product missing?
Request received. We will proceed within 72 hours.