Desiccant dryer
Atlas Copco BD 360
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- 763 SCFM1,296 m³/h
- Dew point
- -40 °C (-40 °F)As published: -40 °C / -40 °F
- ISO 8573-1 class
- Class 2 (derived)
- Type
- Blower purge
- Manufacturer
- Atlas Copco
- Line
- BD 360-1600
- Conditions
- FAD 7 bar(e)/100 psig
- Voltage
- n/a
- Frequency
- 50 Hz · 60 Hz
- Brochure market
- Worldwide
- CSA
- n/a
- CRN
- yes (stated in brochure)
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| Pneumatech PB 760 HE | ≈ 763 SCFM1,296 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
| Hankison HBP750 | 750 SCFM≈ 1,274 m³/h | -40 °C (-40 °F) | Class 2 | North America |
| Kaeser KBD 750 | 750 SCFM≈ 1,274 m³/h | -40 °C (-40 °F) | Class 2 (derived) | North America |
| Pneumatic Products (SPX) IBP750 | 750 SCFM≈ 1,274 m³/h | -40 °C (-40 °F) | Class 2 | North America |
| Altec AIR HBP-0800-4 | 800 SCFM≈ 1,359 m³/h | -40 °C (-40 °F) | Class 2 | North America |
| BEKO Technologies XFe 800 | 800 SCFM≈ 1,359 m³/h | -40 °C (-40 °F) | Class 2 (derived) | North America |
| Champion XCHB800 | 800 SCFM1,362 m³/h | -40 °C (-40 °F) | Class 2 (derived) | North America |
| Gardner Denver GBPD800 | 800 SCFM≈ 1,359 m³/h | -62.2 °C (-80 °F) | Class 2 (derived) | North America |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other BD 360-1600 models
Is your product missing?
Request received. We will proceed within 72 hours.