Desiccant dryer
Kaeser KBD 750
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- 750 SCFM≈ 1,274 m³/h
- Dew point
- -40 °C (-40 °F)As published: -40 °F
- ISO 8573-1 class
- Class 2 (derived)
- Type
- Blower purge
- Manufacturer
- Kaeser
- Line
- KBD
- Conditions
- @100 psig 100 °F
- Voltage
- n/a
- Frequency
- n/a
- Brochure market
- North America
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| Hankison HBP750 | 750 SCFM≈ 1,274 m³/h | -40 °C (-40 °F) | Class 2 | North America |
| Pneumatic Products (SPX) IBP750 | 750 SCFM≈ 1,274 m³/h | -40 °C (-40 °F) | Class 2 | North America |
| Pneumatech PB 760 HE | ≈ 763 SCFM1,296 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
| Atlas Copco BD 360 | 763 SCFM1,296 m³/h | -40 °C (-40 °F) | Class 2 (derived) | Worldwide |
| Altec AIR HBP-0800-4 | 800 SCFM≈ 1,359 m³/h | -40 °C (-40 °F) | Class 2 | North America |
| BEKO Technologies XFe 800 | 800 SCFM≈ 1,359 m³/h | -40 °C (-40 °F) | Class 2 (derived) | North America |
| Champion XCHB800 | 800 SCFM1,362 m³/h | -40 °C (-40 °F) | Class 2 (derived) | North America |
| Gardner Denver GBPD800 | 800 SCFM≈ 1,359 m³/h | -62.2 °C (-80 °F) | Class 2 (derived) | North America |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other KBD models
Is your product missing?
Request received. We will proceed within 72 hours.