Desiccant dryer
Altec AIR MHR125
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- 125 SCFM≈ 212 m³/h
- Dew point
- -73.3 to -40 °C (-99.9 to -40 °F)As published: -40 °F/C or -100 °F (selectable)
- ISO 8573-1 class
- Class 1 to 2 (derived)
- Type
- Heatless
- Manufacturer
- Altec AIR
- Line
- MHR
- Voltage
- 115/1/50-60
- Frequency
- 50 Hz · 60 Hz
- Brochure market
- North America
- CSA
- n/a
- CRN
- yes
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| Pneumatic Products (SPX) 125CDA | 125 SCFM≈ 212 m³/h | -73 °C (-99.4 °F) | Class 1 (derived) | North America |
| Pneumatech PH 130 HE | 127 SCFM216 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | North America |
| Nano Purification HL 125 | ≈ 127 SCFM216 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
| BEKO Technologies XCp 120 | 120 SCFM≈ 204 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 (derived) | North America |
| Champion XCHL120 | 120 SCFM204 m³/h | -73 °C (-99.4 °F) | Class 1 | North America |
| Gardner Denver XGHL120 | 120 SCFM204 m³/h | -73 °C (-99.4 °F) | Class 1 | North America |
| Ingersoll Rand HL120 | 120 SCFM204 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | North America |
| Mikropor MMD120 | 120 SCFM200 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other MHR models
Is your product missing?
Request received. We will proceed within 72 hours.