Desiccant dryer
Altec AIR MDH6
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- 3.2 SCFM≈ 5 m³/h
- Dew point
- -40 °C (-40 °F)As published: -40 °F/C
- ISO 8573-1 class
- Class 2 (derived)
- Type
- Heatless
- Manufacturer
- Altec AIR
- Line
- MDH
- Voltage
- 120 VAC / 240 VAC / 12 VDC / 24 VDC
- Frequency
- n/a
- Brochure market
- North America
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| Atlas Copco CD 1.5 | 3.2 SCFM5.4 m³/h | -40 °C (-40 °F) | Class 2 | Worldwide |
| Deltech DHDM 3 | 3 SCFM≈ 5 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | North America |
| Hankison PHDM 3 | 3 SCFM≈ 5 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | North America |
| Mikropor MMD3 | 3 SCFM5 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
| Nano Purification NDL 010 | 3 SCFM≈ 5 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | North America |
| Parker DAS1 | 3 SCFM5.1 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | Worldwide |
| Sullair DMD-3 | 3 SCFM≈ 5 m³/h | -73 to -20 °C (-99.4 to -4 °F) | Classes 1, 2, 3 (derived) | North America |
| ZEKS 3ZMA | 3 SCFM≈ 5 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 | North America |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other MDH models
Is your product missing?
Request received. We will proceed within 72 hours.