Desiccant dryer
ZEKS 3ZMA
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- 3 SCFM≈ 5 m³/h
- Dew point
- -73.3 to -40 °C (-99.9 to -40 °F)As published: -40 °F (-100 °F/ISO class 1 pour 24-177ZMA)
- ISO 8573-1 class
- Class 1 to 2
- Type
- Heatless
- Manufacturer
- ZEKS
- Line
- ZMA (modular)
- Conditions
- @100 psig, 100 °F inlet and ambient
- Voltage
- 115/1/60
- Frequency
- 60 Hz
- Brochure market
- North America
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| Deltech DHDM 3 | 3 SCFM≈ 5 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | North America |
| Hankison PHDM 3 | 3 SCFM≈ 5 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | North America |
| Mikropor MMD3 | 3 SCFM5 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
| Nano Purification NDL 010 | 3 SCFM≈ 5 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | North America |
| Parker DAS1 | 3 SCFM5.1 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | Worldwide |
| Sullair DMD-3 | 3 SCFM≈ 5 m³/h | -73 to -20 °C (-99.4 to -4 °F) | Classes 1, 2, 3 (derived) | North America |
| Ingersoll Rand DA5IM | ≈ 3 SCFM5 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
| Mattei DD 10 | 3 SCFM6 m³/h | -70 to -20 °C (-94 to -4 °F) | Classes 1, 2, 3 (derived) | Europe / international |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other ZMA (modular) models
Is your product missing?
Request received. We will proceed within 72 hours.