Desiccant dryer
ZEKS 177ZMA
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- 177 SCFM≈ 301 m³/h
- Dew point
- -73.3 to -40 °C (-99.9 to -40 °F)As published: -40 °F (-100 °F/ISO class 1 pour 24-177ZMA)
- ISO 8573-1 class
- Class 1 to 2
- Type
- Heatless
- Manufacturer
- ZEKS
- Line
- ZMA (modular)
- Conditions
- @100 psig, 100 °F inlet and ambient
- Voltage
- 115/1/60
- Frequency
- 60 Hz
- Brochure market
- North America
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| Deltech DHDM 177 | 177 SCFM≈ 301 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | North America |
| Hankison PHDM 177 | 177 SCFM≈ 301 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | North America |
| Hertz Kompressoren HDA 300 | 177 SCFM300 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
| Nano Purification NDL 130N | 177 SCFM≈ 301 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | North America |
| Ingersoll Rand DA300IM | ≈ 177 SCFM300 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
| Parker DME080 | 176 SCFM299 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | Worldwide |
| Quincy QMOD00175 | 175 SCFM≈ 297 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 | North America |
| Mikropor MMD180 | 180 SCFM300 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other ZMA (modular) models
Is your product missing?
Request received. We will proceed within 72 hours.