Desiccant dryer
Altec AIR HR3
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- 9 SCFM≈ 15 m³/h
- Dew point
- -73.3 to -40 °C (-99.9 to -40 °F)As published: -40 °F/C std (-100 °F optional)
- ISO 8573-1 class
- Class 2
- Type
- Heatless
- Manufacturer
- Altec AIR
- Line
- HR
- Voltage
- 120 VAC / 240 VAC / 12 VDC / 24 VDC
- Frequency
- n/a
- Brochure market
- North America
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| Deltech DHDM 9 | 9 SCFM≈ 15 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | North America |
| Hankison PHDM 9 | 9 SCFM≈ 15 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | North America |
| ZEKS 9ZMA | 9 SCFM≈ 15 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 | North America |
| Ingersoll Rand DA15IM | ≈ 9 SCFM15 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
| Atlas Copco CD 5 | 9.5 SCFM16.2 m³/h | -40 °C (-40 °F) | Class 2 | Worldwide |
| Chicago Pneumatic CPADM-10 | 10 SCFM≈ 17 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 (derived) | North America |
| Mikropor MMD10 | 10 SCFM20 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
| Nano Purification NDL 030 | 10 SCFM≈ 17 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | North America |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other HR models
Is your product missing?
Request received. We will proceed within 72 hours.