Lubricated rotary screw compressor
Kaeser ESD 300
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Reference flow
- 1,572 cfm125 psig (≈ 8.6 bar)
- Power
- n/a
- Type
- Fixed speed
- Manufacturer
- Kaeser
- Line
- ESD
- Stages
- 1
- Cooling
- Air, or water depending on version
- Voltage
- 460/575 V (series)
- Frequency
- 60 Hz
- Brochure market
- North America
- CSA
- n/a
- CRN
- ASME/CRN mention (receiver/vessel)
- Source
- Manufacturer’s page
Published flow by pressure
| Pressure | Flow | In m³/min |
|---|---|---|
| 125 psig (≈ 8.6 bar) | 1,572 cfm | ≈ 44.51 m³/min |
| 175 psig (≈ 12.1 bar) | 1,261 cfm | ≈ 35.71 m³/min |
| 217 psig (≈ 15 bar) | 1,020 cfm | ≈ 28.88 m³/min |
Values published by the manufacturer, at its reference conditions; no interpolation. “≈” = converted from another published unit.
Comparable models
Compare side by side| Model | Flow | At pressure | Power | Market |
|---|---|---|---|---|
| Atlas Copco GA 250 Xtreme | 1,490.2 cfm | 8.5 bar (≈ 123 psig) | 335 hp | Worldwide |
| Sullair LS260 | 1,660 cfm | 125 psig (≈ 8.6 bar) | 350 hp | North America |
| Sullivan-Palatek SP25-350 | 1,380.2 acfm | 125 psig (≈ 8.6 bar) | 350 hp | North America |
| ELGi EG 250 | 1,320 cfm | 9.5 bar (≈ 138 psig) | 300 hp | Worldwide |
| Gardner Denver L290 | 1,262 acfm | 145 psig (≈ 10 bar) | 390 hp | Worldwide |
| ALUP LARGO 315 | 1,704 cfm | 10 bar (≈ 145 psig) | 420 hp | Europe / international |
Same type, flow within ±25% at the same pressure. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other ESD models
Is your product missing?
Request received. We will proceed within 72 hours.