Lubricated rotary screw compressor
Kaeser DSD 250
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Reference flow
- 1,075 cfm125 psig (≈ 8.6 bar)
- Power
- n/a
- Type
- Fixed speed
- Manufacturer
- Kaeser
- Line
- DSD
- Stages
- 1
- Cooling
- Air, or water depending on version
- Voltage
- 460/575 V (series)
- Frequency
- 60 Hz
- Brochure market
- North America
- CSA
- n/a
- CRN
- ASME/CRN mention (receiver/vessel)
- Source
- Manufacturer’s page
Published flow by pressure
| Pressure | Flow | In m³/min |
|---|---|---|
| 125 psig (≈ 8.6 bar) | 1,075 cfm | ≈ 30.44 m³/min |
| 175 psig (≈ 12.1 bar) | 878 cfm | ≈ 24.86 m³/min |
| 217 psig (≈ 15 bar) | 689 cfm | ≈ 19.51 m³/min |
Values published by the manufacturer, at its reference conditions; no interpolation. “≈” = converted from another published unit.
Comparable models
Compare side by side| Model | Flow | At pressure | Power | Market |
|---|---|---|---|---|
| ELGi EG 200 | 1,100 cfm | 9.5 bar (≈ 138 psig) | 250 hp | Worldwide |
| Gardner Denver L200 | 1,035.2 acfm | 145 psig (≈ 10 bar) | 270 hp | Worldwide |
| Atlas Copco GA 160 | 1,017 cfm | 125 psig (≈ 8.6 bar) | 215 hp | Worldwide |
| Sullivan-Palatek SP25-250 | 1,133.3 acfm | 125 psig (≈ 8.6 bar) | 250 hp | North America |
| Sullair LS160 | 985 cfm | 125 psig (≈ 8.6 bar) | 200 hp | North America |
| ALUP LARGO 200 | 1,070 cfm | 10 bar (≈ 145 psig) | 270 hp | Europe / international |
Same type, flow within ±25% at the same pressure. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other DSD models
Is your product missing?
Request received. We will proceed within 72 hours.