Lubricated rotary screw compressor

FINI MICRO SE 3.0-10

Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.

Reference flow: 14 cfm10 bar (≈ 145 psig)
Power: 4 hp3 kW
Type: Fixed speed
Manufacturer: FINI
Line: MICRO / PLUS 2.2-75 kW
Stages: 1
Cooling: Air
Voltage: n/a
Frequency: n/a
Brochure market: Europe / international
CSA: n/a
CRN: n/a
Source: Manufacturer’s page

Published flow by pressure

Pressure	Flow	In m³/min
10 bar (≈ 145 psig)	14 cfm	≈ 0.4 m³/min

Values published by the manufacturer, at its reference conditions; no interpolation. “≈” = converted from another published unit.

Published configurations

Designation	Part no.	Configuration	Voltage
MICRO SE 3.0-10	V51JQ72FNM760	n/a	n/a
MICRO SE 3.0-10-200	V77JQ72FNM701	Tank-mounted 200 L	n/a
MICRO SE 3.0-10-200 ES	V77JQ72FNM801	Tank-mounted 200 L, with dryer	n/a

Comparable models

Compare side by side

Model	Flow	At pressure	Power	Market
ABAC SPINN3 10	≈ 12.9 cfm	10 bar (≈ 145 psig)	4 hp	Europe / international
Champion D5	14.2 cfm	145 psig (≈ 10 bar)	5 hp	North America
Hertz Kompressoren HGS 4	≈ 13.1 cfm	10 bar (≈ 145 psig)	5.5 hp	Worldwide
Kaeser SX 4	≈ 13.1 cfm	10 bar (≈ 145 psig)	≈ 4 hp	Worldwide
Sullair ST410	16 cfm	150 psig (≈ 10.3 bar)	5 hp	North America
Quincy QGS-5	16.8 cfm	145 psig (≈ 10 bar)	5 hp	North America

Same type, flow within ±25% at the same pressure. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.

Is your product missing?