Lubricated rotary screw compressor
ABAC SPINN3 10
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Reference flow
- ≈ 12.9 cfm10 bar (≈ 145 psig)
- Power
- 4 hp3 kW
- Type
- Fixed speed
- Manufacturer
- ABAC
- Line
- SPINN 2.2-7.5 kW
- Stages
- 1
- Cooling
- Air
- Voltage
- 400 V 3ph
- Frequency
- 50 Hz
- Brochure market
- Europe / international
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Published flow by pressure
| Pressure | Flow | In m³/min |
|---|---|---|
| 10 bar (≈ 145 psig) | ≈ 12.9 cfm | ≈ 0.37 m³/min |
Values published by the manufacturer, at its reference conditions; no interpolation. “≈” = converted from another published unit.
Published configurations
| Designation | Part no. | Configuration | Voltage |
|---|---|---|---|
| SPINN3 10 400/50K E CE | 4152054955 | Base-mounted | 400 V 3ph |
| SPINN3 10 400/50K C CE | 4152051955 | Base-mounted | 400 V 3ph |
| SPINN3 10 400/50K 200 E CE | 4152054957 | Tank-mounted 200 L | 400 V 3ph |
| SPINN3 10 400/50K 270 E CE | 4152054959 | Tank-mounted 270 L | 400 V 3ph |
| SPINN3E 10 400/50K 200 E CE | 4152054961 | Tank-mounted 200 L, with dryer | 400 V 3ph |
| SPINN3E 10 400/50K 270 E CE | 4152054963 | Tank-mounted 270 L, with dryer | 400 V 3ph |
| SPINN3 10 400/50K 200 C CE | 4152051957 | Tank-mounted 200 L | 400 V 3ph |
| SPINN3 10 400/50K 270 C CE | 4152051959 | Tank-mounted 270 L | 400 V 3ph |
| SPINN3E 10 400/50K 200 C CE | 4152051961 | Tank-mounted 200 L, with dryer | 400 V 3ph |
| SPINN3E 10 400/50K 270 C CE | 4152051963 | Tank-mounted 270 L, with dryer | 400 V 3ph |
Comparable models
Compare side by side| Model | Flow | At pressure | Power | Market |
|---|---|---|---|---|
| FINI MICRO SE 3.0-10 | 14 cfm | 10 bar (≈ 145 psig) | 4 hp | Europe / international |
| Hertz Kompressoren HGS 4 | ≈ 13.1 cfm | 10 bar (≈ 145 psig) | 5.5 hp | Worldwide |
| Kaeser SX 4 | ≈ 13.1 cfm | 10 bar (≈ 145 psig) | ≈ 4 hp | Worldwide |
| Champion D5 | 14.2 cfm | 145 psig (≈ 10 bar) | 5 hp | North America |
| Sullair ST410 | 16 cfm | 150 psig (≈ 10.3 bar) | 5 hp | North America |
Same type, flow within ±25% at the same pressure. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other SPINN 2.2-7.5 kW models
Is your product missing?
Request received. We will proceed within 72 hours.