Lubricated rotary screw compressor
ABAC SPINN3 8
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Reference flow
- ≈ 16.7 cfm8 bar (≈ 116 psig)
- Power
- 4 hp3 kW
- Type
- Fixed speed
- Manufacturer
- ABAC
- Line
- SPINN 2.2-7.5 kW
- Stages
- 1
- Cooling
- Air
- Voltage
- 400 V 3ph
- Frequency
- 50 Hz
- Brochure market
- Europe / international
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Published flow by pressure
| Pressure | Flow | In m³/min |
|---|---|---|
| 8 bar (≈ 116 psig) | ≈ 16.7 cfm | ≈ 0.47 m³/min |
Values published by the manufacturer, at its reference conditions; no interpolation. “≈” = converted from another published unit.
Published configurations
| Designation | Part no. | Configuration | Voltage |
|---|---|---|---|
| SPINN3 8 400/50K E CE | 4152054954 | Base-mounted | 400 V 3ph |
| SPINN3 8 400/50K C CE | 4152051954 | Base-mounted | 400 V 3ph |
| SPINN3 8 400/50K 200 E CE | 4152054956 | Tank-mounted 200 L | 400 V 3ph |
| SPINN3 8 400/50K 270 E CE | 4152054958 | Tank-mounted 270 L | 400 V 3ph |
| SPINN3E 8 400/50K 200 E CE | 4152054960 | Tank-mounted 200 L, with dryer | 400 V 3ph |
| SPINN3E 8 400/50K 270 E CE | 4152054962 | Tank-mounted 270 L, with dryer | 400 V 3ph |
| SPINN3 8 400/50K 200 C CE | 4152051956 | Tank-mounted 200 L | 400 V 3ph |
| SPINN3 8 400/50K 270 C CE | 4152051958 | Tank-mounted 270 L | 400 V 3ph |
| SPINN3E 8 400/50K 200 C CE | 4152051960 | Tank-mounted 200 L, with dryer | 400 V 3ph |
| SPINN3E 8 400/50K 270 C CE | 4152051962 | Tank-mounted 270 L, with dryer | 400 V 3ph |
Comparable models
Compare side by side| Model | Flow | At pressure | Power | Market |
|---|---|---|---|---|
| FINI MICRO SE 3.0-08 | 15 cfm | 8 bar (≈ 116 psig) | 4 hp | Europe / international |
| Chicago Pneumatic CPM 5.5 | 20 cfm | 0.8 MPa (≈ 116 psig) | 5.5 hp | Europe / international |
| Sullair ST4 (CE) | ≈ 20.5 cfm | 8 bar (≈ 116 psig) | ≈ 5 hp | Europe / international |
| Kaeser SX 4 | 15.9 cfm | 125 psig (≈ 8.6 bar) | 4 hp | North America |
| Hertz Kompressoren HGS 4 | ≈ 17.7 cfm | 8.5 bar (≈ 123 psig) | 5.5 hp | Worldwide |
| Gardner Denver L04 | 18.2 acfm | 125 psig (≈ 8.6 bar) | 5 hp | Worldwide |
Same type, flow within ±25% at the same pressure. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other SPINN 2.2-7.5 kW models
Is your product missing?
Request received. We will proceed within 72 hours.