Lubricated rotary screw compressor

FINI MICRO 5.5-08

Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.

Reference flow: 25 cfm8 bar (≈ 116 psig)
Power: 7.5 hp5.5 kW
Type: Fixed speed
Manufacturer: FINI
Line: MICRO / PLUS 2.2-75 kW
Stages: 1
Cooling: Air
Voltage: n/a
Frequency: n/a
Brochure market: Europe / international
CSA: n/a
CRN: n/a
Source: Manufacturer’s page

Published flow by pressure

Pressure	Flow	In m³/min
8 bar (≈ 116 psig)	25 cfm	≈ 0.71 m³/min

Values published by the manufacturer, at its reference conditions; no interpolation. “≈” = converted from another published unit.

Published configurations

Designation	Part no.	Configuration	Voltage
MICRO 5.5-08	V51JW92FNM760	n/a	n/a
MICRO 5.5-08-270	V91JW92FNM701	Tank-mounted 270 L	n/a
MICRO 5.5-08-500	V83JW92FNM701	Tank-mounted 500 L	n/a
MICRO 5.5-08-270 ES	V91JW92FNM801	Tank-mounted 270 L, with dryer	n/a
MICRO 5.5-08-500 ES	V83JW92FNM801	Tank-mounted 500 L, with dryer	n/a

Comparable models

Compare side by side

Model	Flow	At pressure	Power	Market
ABAC SPINN4 8	≈ 21.2 cfm	8 bar (≈ 116 psig)	5.5 hp	Europe / international
Chicago Pneumatic CPM 7.5	29 cfm	0.8 MPa (≈ 116 psig)	7.5 hp	Europe / international
Sullair ST5 (CE)	≈ 29.3 cfm	8 bar (≈ 116 psig)	≈ 7 hp	Europe / international
Gardner Denver L05	24.9 acfm	125 psig (≈ 8.6 bar)	7.5 hp	Worldwide
Hertz Kompressoren HGS 5,5	≈ 23.3 cfm	8.5 bar (≈ 123 psig)	7.5 hp	Worldwide
Kaeser SX 7.5	28.3 cfm	125 psig (≈ 8.6 bar)	7.5 hp	North America

Same type, flow within ±25% at the same pressure. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.

Is your product missing?