Lubricated rotary screw compressor

FINI K-MAX 22-08

Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.

Reference flow: 127 cfm7.5 bar (≈ 109 psig)
Power: 30 hp22 kW
Type: Fixed speed
Manufacturer: FINI
Line: K-MAX / K-MAX PM 18.5-90 kW
Stages: 1
Cooling: Air
Voltage: n/a
Frequency: n/a
Brochure market: Europe / international
CSA: n/a
CRN: n/a
Source: Manufacturer’s page

Published flow by pressure

Pressure	Flow	In m³/min
7.5 bar (≈ 109 psig)	127 cfm	≈ 3.6 m³/min

Values published by the manufacturer, at its reference conditions; no interpolation. “≈” = converted from another published unit.

Published configurations

Designation	Part no.	Configuration	Voltage
K-MAX 22-08	V60DR92FNMA60	n/a	n/a
K-MAX 22-08 ES	V60DR92FNMB60	with dryer	n/a

Comparable models

Compare side by side

Model	Flow	At pressure	Power	Market
ABAC SPINN 22 8	≈ 126.1 cfm	8 bar (≈ 116 psig)	30 hp	Europe / international
CompAir L22	≈ 128.9 cfm	7.5 bar (≈ 109 psig)	≈ 29 hp	Europe / international
Chicago Pneumatic CPM 30	123 cfm	0.8 MPa (≈ 116 psig)	30 hp	Europe / international
Mark MSM 22	131 cfm	8 bar (≈ 116 psig)	30 hp	Europe / international
Sullair ST2208	127 cfm	115 psig (≈ 7.9 bar)	30 hp	North America
Gardner Denver L22	125.7 acfm	110 psig (≈ 7.6 bar)	30 hp	Worldwide
Ingersoll Rand RSb18ie	124 cfm	7.5 bar (≈ 109 psig)	≈ 24 hp	Worldwide
Kaeser ASK 34	≈ 124 cfm	7.5 bar (≈ 109 psig)	≈ 25 hp	Worldwide

Same type, flow within ±25% at the same pressure. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.

Is your product missing?