Lubricated rotary screw compressor

FINI K-MAX 24-10 VS PM

Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.

Reference flow: 28 to 132 cfm10 bar (≈ 145 psig)
Power: 30 hp22 kW
Type: Variable speed (VSD)
Manufacturer: FINI
Line: K-MAX / K-MAX PM 18.5-90 kW
Stages: 1
Cooling: Air
Voltage: n/a
Frequency: n/a
Brochure market: Europe / international
CSA: n/a
CRN: n/a
Source: Manufacturer’s page

Published flow by pressure

Pressure	Flow	In m³/min
10 bar (≈ 145 psig)	28 to 132 cfm	≈ 0.79 to 3.74 m³/min

Values published by the manufacturer, at its reference conditions; no interpolation. “≈” = converted from another published unit.

Published configurations

Designation	Part no.	Configuration	Voltage
K-MAX 24-10 VS PM	V60LF97FNMA60	n/a	n/a
K-MAX 24-10 ES VS PM	V60LF97FNMB60	with dryer	n/a

Comparable models

Compare side by side

Model	Flow	At pressure	Power	Market
ABAC FORMULA I 22PM 10	≈ 135.2 cfm	10 bar (≈ 145 psig)	30 hp	Europe / international
CompAir L22RS	≈ 32.8 to 111.2 cfm	10 bar (≈ 145 psig)	≈ 29 hp	Europe / international
Kaeser ASK 40 SFC	≈ 28.3 to 131 cfm	10 bar (≈ 145 psig)	≈ 29 hp	Worldwide
Atlas Copco GA 22 VSD+	34.3 to 139.6 cfm	147 psig (≈ 10.1 bar)	30 hp	Worldwide
Sullair 3000V (50 Hz)	143 cfm	150 psig (≈ 10.3 bar)	40 hp	North America

Same type, flow within ±25% at the same pressure. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.

Is your product missing?