Desiccant dryer
Van Air Systems HLSXG-150
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- 150 SCFM≈ 255 m³/h
- Dew point
- -40 °C (-40 °F)As published: -40 °F (water dew point)
- ISO 8573-1 class
- Class 2 (derived)
- Type
- Heatless
- Manufacturer
- Van Air Systems
- Voltage
- 12 VDC or 115V (optional 24 VDC)
- Frequency
- n/a
- Brochure market
- North America
- CSA
- n/a
- CRN
- yes (CRN as standard equipment)
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| Aircel AHLD-150 E | 150 SCFM≈ 255 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 | North America |
| Altec AIR MHR150 | 150 SCFM≈ 255 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 (derived) | North America |
| Chicago Pneumatic CPAD-150 | 150 SCFM≈ 255 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 (derived) | North America |
| Mattei MHL 150 | 150 SCFM≈ 255 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | North America |
| Mikropor MDA 250 | 150 SCFM250 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
| Nano Purification HL 0150 | 150 SCFM≈ 255 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 2 | North America |
| Pneumatech PH 150 HE | 148 SCFM252 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | North America |
| Ingersoll Rand DA250IM | ≈ 147 SCFM250 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other HLSXG (antidéflagrant, gaz naturel) models
Is your product missing?
Request received. We will proceed within 72 hours.