Desiccant dryer
Van Air Systems HLSXG-500
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- 500 SCFM≈ 850 m³/h
- Dew point
- -40 °C (-40 °F)As published: -40 °F (water dew point)
- ISO 8573-1 class
- Class 2 (derived)
- Type
- Heatless
- Manufacturer
- Van Air Systems
- Voltage
- 12 VDC or 115V (optional 24 VDC)
- Frequency
- n/a
- Brochure market
- North America
- CSA
- n/a
- CRN
- yes (CRN as standard equipment)
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| Aircel AHLD-500 E | 500 SCFM≈ 850 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 | North America |
| Altec AIR HOF-0500-1 | 500 SCFM≈ 850 m³/h | -40 °C (-40 °F) | Class 2 | North America |
| BEKO Technologies XCe 500 | 500 SCFM≈ 850 m³/h | -40 °C (-40 °F) | Class 2 (derived) | North America |
| Champion XCHL500 | 500 SCFM852 m³/h | -73 °C (-99.4 °F) | Class 1 | North America |
| Chicago Pneumatic CPAD-500 | 500 SCFM≈ 850 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 (derived) | North America |
| Gardner Denver XGHL500 | 500 SCFM852 m³/h | -73 °C (-99.4 °F) | Class 1 | North America |
| Hertz Kompressoren HDA 850 | 500 SCFM852 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
| Ingersoll Rand HL500 | 500 SCFM852 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | North America |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other HLSXG (antidéflagrant, gaz naturel) models
Is your product missing?
Request received. We will proceed within 72 hours.