Desiccant dryer
Sullivan-Palatek SPDP 650
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- 650 SCFM≈ 1,104 m³/h
- Dew point
- -40 °C (-40 °F)As published: -40 °F
- ISO 8573-1 class
- Class 2 (derived)
- Type
- Heatless
- Manufacturer
- Sullivan-Palatek
- Voltage
- 120 VAC 50-60 Hz
- Frequency
- 50 Hz · 60 Hz
- Brochure market
- North America
- CSA
- cULus (controller)
- CRN
- yes (vessels ASME/CRN)
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| Altec AIR HLD-0650-1 | 650 SCFM≈ 1,104 m³/h | -73 °C (-99.4 °F) | Class 1 | North America |
| BEKO Technologies XCe 650 | 650 SCFM≈ 1,104 m³/h | -40 °C (-40 °F) | Class 2 (derived) | North America |
| Chicago Pneumatic CPAD-650 | 650 SCFM≈ 1,104 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 (derived) | North America |
| Mattei MHL 650 | 650 SCFM≈ 1,104 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | North America |
| Van Air Systems HL-650 | 650 SCFM1,045 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 (derived) | North America |
| Atlas Copco CD 300+ | 636 SCFM1,080 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | Worldwide |
| Nano Purification HL 635 | ≈ 636 SCFM1,080 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
| Pneumatech PH 635 HE | ≈ 636 SCFM1,080 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other SPDP Pro Heatless models
Is your product missing?
Request received. We will proceed within 72 hours.