Desiccant dryer
Sullair SA2000
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- 2,000 SCFM≈ 3,398 m³/h
- Dew point
- -40 °C (-40 °F)As published: -40 °F/-40 °C
- ISO 8573-1 class
- Class 2 (derived)
- Type
- Heatless
- Manufacturer
- Sullair
- Line
- SA
- Voltage
- 120V/1PH
- Frequency
- 50 Hz · 60 Hz
- Brochure market
- North America
- CSA
- yes (ETL UL/CSA)
- CRN
- yes (ASME/CRN)
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| Aircel AHLD-2000 E | 2,000 SCFM≈ 3,398 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 | North America |
| Altec AIR HLD-2000-1 | 2,000 SCFM≈ 3,398 m³/h | -73 °C (-99.4 °F) | Class 1 | North America |
| Mattei MHL 2000 | 2,000 SCFM≈ 3,398 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | North America |
| Mikropor MDA 3600 | 2,000 SCFM3,600 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
| Nano Purification HL 2000 | 2,000 SCFM≈ 3,398 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 2 | North America |
| Van Air Systems HL-2000 | 2,000 SCFM3,216 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 (derived) | North America |
| Atlas Copco CD 970 | 2,056 SCFM3,492 m³/h | -40 °C (-40 °F) | Class 2 (derived) | Worldwide |
| Ingersoll Rand D3300ILA | ≈ 1,942 SCFM3,300 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other SA models
Is your product missing?
Request received. We will proceed within 72 hours.