Desiccant dryer
Pneumatic Products (SPX) IBP4300
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- 4,300 SCFM≈ 7,306 m³/h
- Dew point
- -40 °C (-40 °F)As published: -40 °F/-40 °C
- ISO 8573-1 class
- Class 2
- Type
- Blower purge
- Manufacturer
- Pneumatic Products (SPX)
- Line
- IBP
- Conditions
- CAGI ADF 200: 100 psig, 100 °F
- Voltage
- n/a
- Frequency
- n/a
- Brochure market
- North America
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| Hankison HBP4300 | 4,300 SCFM≈ 7,306 m³/h | -40 °C (-40 °F) | Class 2 | North America |
| Kaeser KBD 4300 | 4,300 SCFM≈ 7,306 m³/h | -40 °C (-40 °F) | Class 2 (derived) | North America |
| Mattei MBP 4300 | 4,300 SCFM≈ 7,306 m³/h | -40 °C (-40 °F) | Class 2 | North America |
| BEKO Technologies FRL 4200 | 4,200 SCFM≈ 7,136 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | North America |
| Pneumatech PB 4450 HE | ≈ 4,450 SCFM7,560 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
| Ingersoll Rand D7000IBA | ≈ 4,120 SCFM7,000 m³/h | -40 °C (-40 °F) | Class 2 (derived) | Worldwide |
| Altec AIR HBP-4000-4 | 4,000 SCFM≈ 6,796 m³/h | -40 °C (-40 °F) | Class 2 | North America |
| Gardner Denver GBPD4000 | 4,000 SCFM≈ 6,796 m³/h | -62.2 °C (-80 °F) | Class 2 (derived) | North America |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other IBP models
Is your product missing?
Request received. We will proceed within 72 hours.