Desiccant dryer
Parker DME012
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- 24 SCFM41 m³/h
- Dew point
- -70 to -40 °C (-94 to -40 °F)As published: -40 °C/-40 °F (optional -70 °C/-100 °F)
- ISO 8573-1 class
- Class 1 to 2
- Type
- Heatless
- Manufacturer
- Parker
- Line
- PNEUDRI MIDIplus
- Conditions
- @7 bar g, 35 °C
- Voltage
- 110/1 or 230/1, 50/60 Hz
- Frequency
- n/a
- Brochure market
- Worldwide
- CSA
- yes (UL, CSA mentioned)
- CRN
- yes (CRN mentioned)
- Source
- n/a
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| Deltech DHDM 24 | 24 SCFM≈ 41 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | North America |
| Hankison PHDM 24 | 24 SCFM≈ 41 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | North America |
| ZEKS 24ZMA | 24 SCFM≈ 41 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 | North America |
| Ingersoll Rand DA40IM | ≈ 24 SCFM40 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
| Altec AIR HLD-0025-1 | 25 SCFM≈ 42 m³/h | -73 °C (-99.4 °F) | Class 1 | North America |
| BEKO Technologies ACC 25 | 25 SCFM≈ 42 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 (derived) | North America |
| Chicago Pneumatic CPADM-25 | 25 SCFM≈ 42 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 (derived) | North America |
| Mikropor MMD25 | 25 SCFM45 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other PNEUDRI MIDIplus models
Is your product missing?
Request received. We will proceed within 72 hours.