Desiccant dryer
Nano Purification HL 0300
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- 300 SCFM≈ 510 m³/h
- Dew point
- -70 to -40 °C (-94 to -40 °F)As published: -40 °F (optional -94 °F)
- ISO 8573-1 class
- Class 2
- Type
- Heatless
- Manufacturer
- Nano Purification
- Line
- D5 HL (US)
- Conditions
- @100 psig, 100 °F, PDP -40 °F
- Voltage
- 115/1/60 (optional 230/1/60, 12 VDC)
- Frequency
- 60 Hz
- Brochure market
- North America
- CSA
- UL/cUL 508A
- CRN
- yes (vessels CRN ≤ HL 1500)
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| Aircel AHLD-300 E | 300 SCFM≈ 510 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 | North America |
| Altec AIR HLD-0300-1 | 300 SCFM≈ 510 m³/h | -73 °C (-99.4 °F) | Class 1 | North America |
| BEKO Technologies XCe 300 | 300 SCFM≈ 510 m³/h | -40 °C (-40 °F) | Class 2 (derived) | North America |
| Champion XCHL300 | 300 SCFM510 m³/h | -73 °C (-99.4 °F) | Class 1 | North America |
| Chicago Pneumatic CPAD-300 | 300 SCFM≈ 510 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 (derived) | North America |
| Gardner Denver XGHL300 | 300 SCFM510 m³/h | -73 °C (-99.4 °F) | Class 1 | North America |
| Ingersoll Rand HL300 | 300 SCFM510 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | North America |
| Mikropor MDA 575 | 300 SCFM575 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other D5 HL (US) models
Is your product missing?
Request received. We will proceed within 72 hours.