Desiccant dryer
MTA NST 810
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- ≈ 3,075 SCFM5,225 m³/h
- Dew point
- -40 °C (-40 °F)As published: -40 °C (alumina); molecular sieve on request
- ISO 8573-1 class
- Class 2 (derived)
- Type
- Heated purge
- Manufacturer
- MTA
- Line
- DryXtreme NST
- Conditions
- Reference FAD 20 °C, 1 bar a, inlet 35 °C
- Voltage
- 400/3/50
- Frequency
- 50 Hz
- Brochure market
- Europe / international
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| Mattei MEH 3100 | 3,100 SCFM≈ 5,267 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | North America |
| Altec AIR HRE-3000-4 | 3,000 SCFM≈ 5,097 m³/h | -40 °C (-40 °F) | Class 2 | North America |
| Champion XCHP3000 | 3,000 SCFM5,094 m³/h | -40 °C (-40 °F) | Class 2 (derived) | North America |
| Ingersoll Rand EH3000 | 3,000 SCFM5,094 m³/h | -40 °C (-40 °F) | Class 2 (derived) | North America |
| Nano Purification EH 3000 | 3,000 SCFM≈ 5,097 m³/h | -40 °C (-40 °F) | Class 2 | North America |
| Quincy QHP-3000 | 3,000 SCFM≈ 5,097 m³/h | -40 °C (-40 °F) | Class 2 (derived) | North America |
| Sullair SAH3000 | 3,000 SCFM≈ 5,097 m³/h | -40 °C (-40 °F) | Class 2 (derived) | North America |
| Deltech RP-3200 | 3,200 SCFM≈ 5,437 m³/h | -40 °C (-40 °F) | Class 2 | North America |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other DryXtreme NST models
Is your product missing?
Request received. We will proceed within 72 hours.