Desiccant dryer
MTA NST 400
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- ≈ 1,519 SCFM2,580 m³/h
- Dew point
- -40 °C (-40 °F)As published: -40 °C (alumina); molecular sieve on request
- ISO 8573-1 class
- Class 2 (derived)
- Type
- Heated purge
- Manufacturer
- MTA
- Line
- DryXtreme NST
- Conditions
- Reference FAD 20 °C, 1 bar a, inlet 35 °C
- Voltage
- 400/3/50
- Frequency
- 50 Hz
- Brochure market
- Europe / international
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| Altec AIR HRE-1500-4 | 1,500 SCFM≈ 2,549 m³/h | -40 °C (-40 °F) | Class 2 | North America |
| Champion XCHP1500 | 1,500 SCFM2,550 m³/h | -40 °C (-40 °F) | Class 2 (derived) | North America |
| Deltech RP-1500 | 1,500 SCFM≈ 2,549 m³/h | -40 °C (-40 °F) | Class 2 | North America |
| Hankison HPD1500 | 1,500 SCFM2,549 m³/h | -40 to -20 °C (-40 to -4 °F) | Class 2 to 3 | North America |
| Ingersoll Rand EH1500 | 1,500 SCFM2,550 m³/h | -40 °C (-40 °F) | Class 2 (derived) | North America |
| Kaeser KED 1500 | 1,500 SCFM≈ 2,549 m³/h | -40 to -20 °C (-40 to -4 °F) | Class 2 to 3 (derived) | North America |
| Nano Purification EH 1500 | 1,500 SCFM≈ 2,549 m³/h | -40 °C (-40 °F) | Class 2 | North America |
| Quincy QHP-1500 | 1,500 SCFM≈ 2,549 m³/h | -40 °C (-40 °F) | Class 2 (derived) | North America |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other DryXtreme NST models
Is your product missing?
Request received. We will proceed within 72 hours.