Desiccant dryer
MTA NST 300
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- ≈ 1,139 SCFM1,935 m³/h
- Dew point
- -40 °C (-40 °F)As published: -40 °C (alumina); molecular sieve on request
- ISO 8573-1 class
- Class 2 (derived)
- Type
- Heated purge
- Manufacturer
- MTA
- Line
- DryXtreme NST
- Conditions
- Reference FAD 20 °C, 1 bar a, inlet 35 °C
- Voltage
- 400/3/50
- Frequency
- 50 Hz
- Brochure market
- Europe / international
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| Nano Purification EH 550 | ≈ 1,165 SCFM1,980 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
| Champion XCHP1200 | 1,200 SCFM2,040 m³/h | -40 °C (-40 °F) | Class 2 (derived) | North America |
| Ingersoll Rand EH1200 | 1,200 SCFM2,040 m³/h | -40 °C (-40 °F) | Class 2 (derived) | North America |
| Sullair SAH1200 | 1,200 SCFM≈ 2,039 m³/h | -40 °C (-40 °F) | Class 2 (derived) | North America |
| Sullivan-Palatek SPDH 1200 | 1,200 SCFM≈ 2,039 m³/h | -40 °C (-40 °F) | Class 2 (derived) | North America |
| Quincy QHP-1220 | 1,220 SCFM≈ 2,073 m³/h | -40 °C (-40 °F) | Class 2 (derived) | North America |
| Deltech RP-1050 | 1,050 SCFM≈ 1,784 m³/h | -40 °C (-40 °F) | Class 2 | North America |
| Hankison HPD1050 | 1,050 SCFM1,784 m³/h | -40 to -20 °C (-40 to -4 °F) | Class 2 to 3 | North America |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other DryXtreme NST models
Is your product missing?
Request received. We will proceed within 72 hours.