Desiccant dryer
Hertz Kompressoren HDA 575
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- 338 SCFM574.8 m³/h
- Dew point
- -70 to -40 °C (-94 to -40 °F)As published: -40 °C (optional -70 °C)
- ISO 8573-1 class
- Class 1 to 2 (derived)
- Type
- Heatless
- Manufacturer
- Hertz Kompressoren
- Line
- HDA
- Voltage
- 230/1/50-60
- Frequency
- 50 Hz · 60 Hz
- Brochure market
- Worldwide
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| Mikropor MMD HC 340 | 340 SCFM575 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
| Pneumatic Products (SPX) 330CDA | 328 SCFM≈ 557 m³/h | -73 °C (-99.4 °F) | Class 1 (derived) | North America |
| Aircel AHLD-350 E | 350 SCFM≈ 595 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 | North America |
| Altec AIR MHR350 | 350 SCFM≈ 595 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 (derived) | North America |
| Atlas Copco CD 165+ | 350 SCFM594 m³/h | -70 °C (-94 °F) | Class 1 | Worldwide |
| Chicago Pneumatic CPAD-350 | 350 SCFM≈ 595 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 (derived) | North America |
| Mattei MHL 350 | 350 SCFM≈ 595 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | North America |
| Quincy QHD-320 | 320 SCFM≈ 544 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 (derived) | North America |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other HDA models
Is your product missing?
Request received. We will proceed within 72 hours.