Desiccant dryer
Hankison HPD750
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- 750 SCFM1,274 m³/h
- Dew point
- -40 to -20 °C (-40 to -4 °F)As published: -40 °F/-40 °C (class 2) to -4 °F/-20 °C (class 3)
- ISO 8573-1 class
- Class 2 to 3
- Type
- Heated purge
- Manufacturer
- Hankison
- Line
- HPD
- Conditions
- @100 psig, 100 °F
- Voltage
- n/a
- Frequency
- n/a
- Brochure market
- North America
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| Deltech RP-750 | 750 SCFM≈ 1,274 m³/h | -40 °C (-40 °F) | Class 2 | North America |
| Kaeser KED 750 | 750 SCFM≈ 1,274 m³/h | -40 to -20 °C (-40 to -4 °F) | Class 2 to 3 (derived) | North America |
| Nano Purification EH 0750 | 750 SCFM≈ 1,274 m³/h | -40 °C (-40 °F) | Class 2 | North America |
| Atlas Copco AD 360 | 763 SCFM1,296 m³/h | -40 °C (-40 °F) | Class 2 (derived) | Worldwide |
| BEKO Technologies ACH 720 | 720 SCFM≈ 1,223 m³/h | -62.2 to -40 °C (-80 to -40 °F) | Class 2 (derived) | North America |
| Altec AIR HRE-0800-4 | 800 SCFM≈ 1,359 m³/h | -40 °C (-40 °F) | Class 2 | North America |
| Champion XCHP800 | 800 SCFM1,362 m³/h | -40 °C (-40 °F) | Class 2 (derived) | North America |
| Ingersoll Rand EH800 | 800 SCFM1,362 m³/h | -40 °C (-40 °F) | Class 2 (derived) | North America |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other HPD models
Is your product missing?
Request received. We will proceed within 72 hours.