Desiccant dryer
Hankison HBP900
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- 900 SCFM≈ 1,529 m³/h
- Dew point
- -40 °C (-40 °F)As published: -40 °F/-40 °C (class 2)
- ISO 8573-1 class
- Class 2
- Type
- Blower purge
- Manufacturer
- Hankison
- Line
- HBP
- Conditions
- @100 psig, 100 °F ; CAGI ADF 200
- Voltage
- n/a
- Frequency
- n/a
- Brochure market
- North America
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| Kaeser KBD 900 | 900 SCFM≈ 1,529 m³/h | -40 °C (-40 °F) | Class 2 (derived) | North America |
| Pneumatic Products (SPX) IBP900 | 900 SCFM≈ 1,529 m³/h | -40 °C (-40 °F) | Class 2 | North America |
| BEKO Technologies FRL 850 | 850 SCFM≈ 1,444 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | North America |
| Quincy QBP-850 | 850 SCFM≈ 1,444 m³/h | -40 to -12.2 °C (-40 to 10 °F) | Classes 2, 4 (derived) | North America |
| Atlas Copco BD 400+ | 848 SCFM1,440 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | Worldwide |
| Nano Purification BP 1020 | ≈ 848 SCFM1,440 m³/h | -40 °C (-40 °F) | Class 2 (derived) | Worldwide |
| Ingersoll Rand D1400IBA | ≈ 824 SCFM1,400 m³/h | -40 °C (-40 °F) | Class 2 (derived) | Worldwide |
| Altec AIR HBP-0800-4 | 800 SCFM≈ 1,359 m³/h | -40 °C (-40 °F) | Class 2 | North America |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other HBP models
Is your product missing?
Request received. We will proceed within 72 hours.