Desiccant dryer
FINI HDT 800
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- 2,862 SCFM4,860 m³/h
- Dew point
- -70 to -20 °C (-94 to -4 °F)As published: -40 °C (catalogue: -20/-40/-70 °C)
- ISO 8573-1 class
- Classes 1, 2, 3 (derived)
- Type
- Heatless
- Manufacturer
- FINI
- Line
- HDT
- Conditions
- 35 °C, 7 barg, PDP -40 °C
- Voltage
- 1/230-240
- Frequency
- 50 Hz · 60 Hz
- Brochure market
- Europe / international
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| CompAir AX767TL | ≈ 2,707 SCFM4,600 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Europe / international |
| Quincy QHD-2800 | 2,818 SCFM≈ 4,788 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 (derived) | North America |
| BEKO Technologies XCp 2800 | 2,800 SCFM≈ 4,757 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 (derived) | North America |
| Sullivan-Palatek SPDPR 2800 | 2,800 SCFM≈ 4,757 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 (derived) | North America |
| Hertz Kompressoren HDA 5000 | 2,943 SCFM4,998 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
| Aircel AHLD-3000 E | 3,000 SCFM≈ 5,097 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 | North America |
| Altec AIR MHR3000 | 3,000 SCFM≈ 5,097 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 (derived) | North America |
| Champion CDT3000 | 3,000 SCFM≈ 5,097 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 | North America |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other HDT models
Is your product missing?
Request received. We will proceed within 72 hours.