Desiccant dryer
FINI HDT 18
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- 65 SCFM111 m³/h
- Dew point
- -70 to -20 °C (-94 to -4 °F)As published: -40 °C (catalogue: -20/-40/-70 °C)
- ISO 8573-1 class
- Classes 1, 2, 3 (derived)
- Type
- Heatless
- Manufacturer
- FINI
- Line
- HDT
- Conditions
- 35 °C, 7 barg, PDP -40 °C
- Voltage
- 1/230
- Frequency
- 50 Hz · 60 Hz
- Brochure market
- Europe / international
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| MTA NA196 | ≈ 65 SCFM110 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Europe / international |
| Mattei DD 90 | 66 SCFM114 m³/h | -70 to -20 °C (-94 to -4 °F) | Classes 1, 2, 3 (derived) | Europe / international |
| BEKO Technologies AC 410 | ≈ 59 SCFM100 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Europe / international |
| Donaldson Ultrapac 2000 0100 | ≈ 59 SCFM100 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Europe / international |
| Ultrafilter HL 100 | ≈ 59 SCFM100 m³/h | -70 to -20 °C (-94 to -4 °F) | Classes 1, 3 (derived) | Europe / international |
| MARK ADS 21 | 74 SCFM126 m³/h | -70 to -20 °C (-94 to -4 °F) | Classes 1, 2, 3 (derived) | Europe / international |
| ALUP AD 125 | ≈ 74 SCFM126 m³/h | -70 to -20 °C (-94 to -4 °F) | Classes 1, 2, 3 (derived) | Europe / international |
| Worthington Creyssensac DB 125 | ≈ 74 SCFM126 m³/h | -70 to -20 °C (-94 to -4 °F) | Classes 1, 2, 3 (derived) | Europe / international |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other HDT models
Is your product missing?
Request received. We will proceed within 72 hours.