Desiccant dryer
FINI HDT 620
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- 2,208 SCFM3,750 m³/h
- Dew point
- -70 to -20 °C (-94 to -4 °F)As published: -40 °C (catalogue: -20/-40/-70 °C)
- ISO 8573-1 class
- Classes 1, 2, 3 (derived)
- Type
- Heatless
- Manufacturer
- FINI
- Line
- HDT
- Conditions
- 35 °C, 7 barg, PDP -40 °C
- Voltage
- 1/230-240
- Frequency
- 50 Hz · 60 Hz
- Brochure market
- Europe / international
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| CompAir AX550TL | ≈ 1,942 SCFM3,300 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Europe / international |
| Hertz Kompressoren HDA 3600 | 2,119 SCFM3,600 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
| Hankison HHL 3601 | ≈ 2,119 SCFM3,600 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
| BEKO Technologies XCp 2300 | 2,300 SCFM≈ 3,908 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 (derived) | North America |
| Sullivan-Palatek SPDPR 2300 | 2,300 SCFM≈ 3,908 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 (derived) | North America |
| Champion XCHL2100 | 2,100 SCFM3,570 m³/h | -73 °C (-99.4 °F) | Class 1 | North America |
| Chicago Pneumatic CPAD-2100 | 2,100 SCFM≈ 3,568 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 (derived) | North America |
| Gardner Denver DGH2100 | 2,100 SCFM≈ 3,568 m³/h | -73 to 3 °C (-99.4 to 37.4 °F) | Classes 1, 2, 3, 4 | North America |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other HDT models
Is your product missing?
Request received. We will proceed within 72 hours.