Desiccant dryer
FINI HDT 350
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- 1,272 SCFM2,160 m³/h
- Dew point
- -70 to -20 °C (-94 to -4 °F)As published: -40 °C (catalogue: -20/-40/-70 °C)
- ISO 8573-1 class
- Classes 1, 2, 3 (derived)
- Type
- Heatless
- Manufacturer
- FINI
- Line
- HDT
- Conditions
- 35 °C, 7 barg, PDP -40 °C
- Voltage
- 1/230
- Frequency
- 50 Hz · 60 Hz
- Brochure market
- Europe / international
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| CompAir AX333TL | ≈ 1,177 SCFM2,000 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Europe / international |
| Aircel AHLD-1250 E | 1,250 SCFM≈ 2,124 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 | North America |
| Altec AIR HLD-1250-1 | 1,250 SCFM≈ 2,124 m³/h | -73 °C (-99.4 °F) | Class 1 | North America |
| Chicago Pneumatic CPAD-1250 | 1,250 SCFM≈ 2,124 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 (derived) | North America |
| Mattei MHL 1250 | 1,250 SCFM≈ 2,124 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | North America |
| Mikropor MDA 2200 | 1,250 SCFM2,200 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
| Van Air Systems HL-1250 | 1,250 SCFM2,010 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 (derived) | North America |
| Hertz Kompressoren HDA 2200 | 1,295 SCFM2,202 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other HDT models
Is your product missing?
Request received. We will proceed within 72 hours.