Desiccant dryer
BEKO Technologies AC 136
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- ≈ 15 SCFM25.5 m³/h
- Dew point
- -40 °C (-40 °F)As published: -40 °C
- ISO 8573-1 class
- Class 2 (derived)
- Type
- Heatless
- Manufacturer
- BEKO Technologies
- Voltage
- 100-240 VAC / 12-24 VDC
- Frequency
- 50 Hz · 60 Hz
- Brochure market
- Europe / international
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| Mattei DD 40 | 15 SCFM24 m³/h | -70 to -20 °C (-94 to -4 °F) | Classes 1, 2, 3 (derived) | Europe / international |
| MARK ADS 4 | 15.3 SCFM26 m³/h | -70 to -20 °C (-94 to -4 °F) | Classes 1, 2, 3 (derived) | Europe / international |
| Donaldson Ultrapac 2000 0025 | ≈ 15 SCFM25 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Europe / international |
| MTA NA046 | ≈ 15 SCFM25 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Europe / international |
| ALUP AD 25 | ≈ 15 SCFM26 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Europe / international |
| Worthington Creyssensac DB 3 C | ≈ 15 SCFM26 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Europe / international |
| Altec AIR HLD-0015-1 | 15 SCFM≈ 25 m³/h | -73 °C (-99.4 °F) | Class 1 | North America |
| Chicago Pneumatic CPADM-15 | 15 SCFM≈ 25 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 (derived) | North America |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other DRYPOINT AC 119-196 models
Is your product missing?
Request received. We will proceed within 72 hours.