Desiccant dryer
MTA NA046
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- ≈ 15 SCFM25 m³/h
- Dew point
- -70 to -40 °C (-94 to -40 °F)As published: -40 °C (up to -70 °C)
- ISO 8573-1 class
- Class 1 to 2 (derived)
- Type
- Heatless
- Manufacturer
- MTA
- Line
- DryXtreme NA
- Conditions
- Reference 20 °C/1 bar a, 7 bar(ü), inlet 35 °C, PDP -40 °C
- Voltage
- n/a
- Frequency
- n/a
- Brochure market
- Europe / international
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| Donaldson Ultrapac 2000 0025 | ≈ 15 SCFM25 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Europe / international |
| Mattei DD 40 | 15 SCFM24 m³/h | -70 to -20 °C (-94 to -4 °F) | Classes 1, 2, 3 (derived) | Europe / international |
| MARK ADS 4 | 15.3 SCFM26 m³/h | -70 to -20 °C (-94 to -4 °F) | Classes 1, 2, 3 (derived) | Europe / international |
| ALUP AD 25 | ≈ 15 SCFM26 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Europe / international |
| Worthington Creyssensac DB 3 C | ≈ 15 SCFM26 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Europe / international |
| Ingersoll Rand DA25IM | ≈ 15 SCFM25 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
| Altec AIR HLD-0015-1 | 15 SCFM≈ 25 m³/h | -73 °C (-99.4 °F) | Class 1 | North America |
| BEKO Technologies ACC 15 | 15 SCFM≈ 25 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 (derived) | North America |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other DryXtreme NA models
Is your product missing?
Request received. We will proceed within 72 hours.