Desiccant dryer
MTA NA012
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- ≈ 4 SCFM7 m³/h
- Dew point
- -70 to -40 °C (-94 to -40 °F)As published: -40 °C (up to -70 °C)
- ISO 8573-1 class
- Class 1 to 2 (derived)
- Type
- Heatless
- Manufacturer
- MTA
- Line
- DryXtreme NA
- Conditions
- Reference 20 °C/1 bar a, 7 bar(ü), inlet 35 °C, PDP -40 °C
- Voltage
- n/a
- Frequency
- n/a
- Brochure market
- Europe / international
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| ALUP AD 7 | ≈ 4 SCFM7 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Europe / international |
| Worthington Creyssensac DB 05 C | ≈ 4 SCFM7 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Europe / international |
| MARK ADS 1 | 4.1 SCFM7 m³/h | -70 to -20 °C (-94 to -4 °F) | Classes 1, 2, 3 (derived) | Europe / international |
| Mattei DD 20 | 5 SCFM8.4 m³/h | -70 to -20 °C (-94 to -4 °F) | Classes 1, 2, 3 (derived) | Europe / international |
| Atlas Copco CD 2 | 4.2 SCFM7.2 m³/h | -70 °C (-94 °F) | Class 1 | Worldwide |
| BEKO Technologies ACC 4 | 4 SCFM≈ 7 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 (derived) | North America |
| OMI HL 0030 CLASS 1 | 4 SCFM7 m³/h | -70 °C (-94 °F) | Class 1 | Worldwide |
| Chicago Pneumatic CPADM-5 | 5 SCFM≈ 8 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 (derived) | North America |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other DryXtreme NA models
Is your product missing?
Request received. We will proceed within 72 hours.