Refrigerated dryer
Atlas Copco F 40
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- 84.8 SCFM144 m³/h
- Dew point
- 7 °C (44.6 °F)As published: +7 °C (±1) / 45 °F
- ISO 8573-1 class
- Class 5
- Type
- Non-cycling
- Manufacturer
- Atlas Copco
- Line
- F 5-130
- Voltage
- 230/1/50
- Frequency
- 50 Hz
- Brochure market
- Worldwide
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| ABAC DRY 165 | 83 SCFM141 m³/h | 4 °C (39.2 °F) | Class 5 (derived) | Worldwide |
| Chicago Pneumatic CPX 80 | 83 SCFM141 m³/h | 4 °C (39.2 °F) | Class 5 (derived) | Worldwide |
| Worthington Creyssensac DW 13 | 83 SCFM141 m³/h | 4 °C (39.2 °F) | Class 4 | Worldwide |
| Mattei MD 25 | 88.3 SCFM150 m³/h | 3 °C (37.4 °F) | Class 4 (derived) | Worldwide |
| BEKO Technologies DRYPOINT RA III 135 AC | ≈ 81 SCFM138 m³/h | 3 °C (37.4 °F) | Class 4 (derived) | Worldwide |
| BOGE DS 26-2 | ≈ 92 SCFM156 m³/h | 3 °C (37.4 °F) | Class 4 (derived) | Worldwide |
| MTA DEiT 026 | ≈ 92 SCFM156 m³/h | 3 °C (37.4 °F) | Class 4 | Worldwide |
| Aircel VF-75 | 75 SCFM≈ 127 m³/h | 3.3 to 37.8 °C (37.9 to 100 °F) | Class 5 (derived) | North America |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other F 5-130 models
Is your product missing?
Request received. We will proceed within 72 hours.