Desiccant dryer
Atlas Copco CD 90
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- 191 SCFM324 m³/h
- Dew point
- -40 to -20 °C (-40 to -4 °F)As published: -40 °C / -40 °F ; -20 °C / -5 °F
- ISO 8573-1 class
- Class 2 to 3
- Type
- Heatless
- Manufacturer
- Atlas Copco
- Line
- CD 25-260
- Conditions
- FAD 7 bar(e)/100 psig
- Voltage
- n/a
- Frequency
- 50 Hz · 60 Hz
- Brochure market
- Worldwide
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| Nano Purification HL 200 | ≈ 191 SCFM324 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
| Pneumatic Products (SPX) 190CDA | 187 SCFM≈ 318 m³/h | -73 °C (-99.4 °F) | Class 1 (derived) | North America |
| Aircel AHLD-200 E | 200 SCFM≈ 340 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 | North America |
| Altec AIR HLD-0200-1 | 200 SCFM≈ 340 m³/h | -73 °C (-99.4 °F) | Class 1 | North America |
| BEKO Technologies XCe 200 | 200 SCFM≈ 340 m³/h | -40 °C (-40 °F) | Class 2 (derived) | North America |
| Champion XCHL200 | 200 SCFM342 m³/h | -73 °C (-99.4 °F) | Class 1 | North America |
| Chicago Pneumatic CPAD-200 | 200 SCFM≈ 340 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 (derived) | North America |
| Gardner Denver XGHL200 | 200 SCFM342 m³/h | -73 °C (-99.4 °F) | Class 1 | North America |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other CD 25-260 models
Is your product missing?
Request received. We will proceed within 72 hours.