Desiccant dryer
Atlas Copco CD 60+
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- 127 SCFM216 m³/h
- Dew point
- n/a
- ISO 8573-1 class
- n/a
- Type
- Heatless
- Manufacturer
- Atlas Copco
- Line
- CD+ 1-1400
- Conditions
- FAD 7 bar(e)/100 psig
- Voltage
- n/a
- Frequency
- 50 Hz · 60 Hz
- Brochure market
- Worldwide
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| Pneumatech PH 130 HE | 127 SCFM216 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | North America |
| Nano Purification HL 125 | ≈ 127 SCFM216 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
| Altec AIR HOF-0125-1 | 125 SCFM≈ 212 m³/h | -40 °C (-40 °F) | Class 2 | North America |
| Pneumatic Products (SPX) 125CDA | 125 SCFM≈ 212 m³/h | -73 °C (-99.4 °F) | Class 1 (derived) | North America |
| Parker DME060 | 130 SCFM221 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | Worldwide |
| Sullair SA130 | 130 SCFM≈ 221 m³/h | -40 °C (-40 °F) | Class 2 (derived) | North America |
| Champion XCHL120 | 120 SCFM204 m³/h | -73 °C (-99.4 °F) | Class 1 | North America |
| Gardner Denver XGHL120 | 120 SCFM204 m³/h | -73 °C (-99.4 °F) | Class 1 | North America |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other CD+ 1-1400 models
Is your product missing?
Request received. We will proceed within 72 hours.