Desiccant dryer
Atlas Copco CD 330+
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- 700 SCFM1,188 m³/h
- Dew point
- n/a
- ISO 8573-1 class
- n/a
- Type
- Heatless
- Manufacturer
- Atlas Copco
- Line
- CD+ 1-1400
- Conditions
- FAD 7 bar(e)/100 psig
- Voltage
- n/a
- Frequency
- 50 Hz · 60 Hz
- Brochure market
- Worldwide
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| Mikropor MDA 1250 | 700 SCFM1,250 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
| Parker DH110 | 700 SCFM1,189 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | North America |
| OMI HLA 1200 | 706 SCFM1,200 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | Worldwide |
| Pneumatech PH 690 HE | ≈ 710 SCFM1,206 m³/h | -40 °C (-40 °F) | Class 2 (derived) | Worldwide |
| Hertz Kompressoren HDA 1250 | 736 SCFM1,248 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
| Aircel AHLD-750 E | 750 SCFM≈ 1,274 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 | North America |
| Altec AIR HLD-0650-1 | 650 SCFM≈ 1,104 m³/h | -73 °C (-99.4 °F) | Class 1 | North America |
| BEKO Technologies XCe 650 | 650 SCFM≈ 1,104 m³/h | -40 °C (-40 °F) | Class 2 (derived) | North America |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other CD+ 1-1400 models
Is your product missing?
Request received. We will proceed within 72 hours.