Refrigerated dryer
Aircel VF-60
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- 60 SCFM≈ 102 m³/h
- Dew point
- 3.3 to 37.8 °C (37.9 to 100 °F)As published: 38 °F (CAGI ADF 100, 100 psig/100 °F)
- ISO 8573-1 class
- Class 5 (derived)
- Type
- Non-cycling
- Manufacturer
- Aircel
- Line
- VF / DHTVF
- Conditions
- CAGI ADF 100, 100 psig/100 °F
- Voltage
- 115-1-60
- Frequency
- 60 Hz
- Brochure market
- North America
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| BEKO Technologies DRYPOINT RX 60 | 60 SCFM≈ 102 m³/h | 2.8 to 7.2 °C (37 to 45 °F) | Class 4 to 5 | North America |
| BOGE DS 18-2 | ≈ 64 SCFM108 m³/h | 3 °C (37.4 °F) | Class 4 (derived) | Worldwide |
| MTA DEiT 018 | ≈ 64 SCFM108 m³/h | 3 °C (37.4 °F) | Class 4 | Worldwide |
| ABAC DRY 130 | 63.6 SCFM108 m³/h | 4 °C (39.2 °F) | Class 5 (derived) | Worldwide |
| Atlas Copco F 30 | 63.6 SCFM108 m³/h | 7 °C (44.6 °F) | Class 5 | Worldwide |
| Chicago Pneumatic CPX 60 | 63.6 SCFM108 m³/h | 4 °C (39.2 °F) | Class 5 (derived) | Worldwide |
| Worthington Creyssensac DW 10 | 63.6 SCFM108 m³/h | 4 °C (39.2 °F) | Class 4 | Worldwide |
| Altec AIR RAD-0055A | 55 SCFM≈ 93 m³/h | n/a | Class 4 to 5 | North America |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other VF / DHT models
Is your product missing?
Request received. We will proceed within 72 hours.