Lubricated rotary screw compressor
Kaeser SXC 8
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Reference flow
- ≈ 28.3 cfm7.5 bar (≈ 109 psig)
- Power
- ≈ 7 hp5.5 kW
- Type
- Fixed speed
- Manufacturer
- Kaeser
- Line
- SXC
- Stages
- 1
- Cooling
- Air
- Voltage
- n/a
- Frequency
- 50 Hz
- Brochure market
- Worldwide
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Published flow by pressure
| Pressure | Flow | In m³/min |
|---|---|---|
| 7.5 bar (≈ 109 psig) | ≈ 28.3 cfm | ≈ 0.8 m³/min |
| 10 bar (≈ 145 psig) | ≈ 23.7 cfm | ≈ 0.67 m³/min |
| 13 bar (≈ 189 psig) | ≈ 19.1 cfm | ≈ 0.54 m³/min |
Values published by the manufacturer, at its reference conditions; no interpolation. “≈” = converted from another published unit.
Comparable models
Compare side by side| Model | Flow | At pressure | Power | Market |
|---|---|---|---|---|
| Hertz Kompressoren HGS 5,5 | ≈ 25.1 cfm | 7.5 bar (≈ 109 psig) | 7.5 hp | Worldwide |
| Gardner Denver L05 | 24.9 acfm | 125 psig (≈ 8.6 bar) | 7.5 hp | Worldwide |
| Chicago Pneumatic CPM 7.5 | 29 cfm | 0.8 MPa (≈ 116 psig) | 7.5 hp | Europe / international |
| Sullair ST5 (CE) | ≈ 29.3 cfm | 8 bar (≈ 116 psig) | ≈ 7 hp | Europe / international |
| ABAC SPINN 5.5X 8 | ≈ 29.9 cfm | 8 bar (≈ 116 psig) | 7.5 hp | Europe / international |
| FINI MICRO 5.5-08 | 25 cfm | 8 bar (≈ 116 psig) | 7.5 hp | Europe / international |
Same type, flow within ±25% at the same pressure. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other SXC models
Is your product missing?
Request received. We will proceed within 72 hours.