Lubricated rotary screw compressor
Kaeser SFC 90M
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Reference flow
- 675 cfm110 psig (≈ 7.6 bar)
- Power
- n/a
- Type
- Variable speed (VSD)
- Manufacturer
- Kaeser
- Line
- SFC
- Stages
- 1
- Cooling
- Air
- Voltage
- 460 V (data); 575 V consult Kaeser
- Frequency
- 60 Hz
- Brochure market
- North America
- CSA
- n/a
- CRN
- ASME/CRN mention (receiver/vessel)
- Source
- Manufacturer’s page
Published flow by pressure
| Pressure | Flow | In m³/min |
|---|---|---|
| 110 psig (≈ 7.6 bar) | 675 cfm | ≈ 19.11 m³/min |
| 125 psig (≈ 8.6 bar) | 641 cfm | ≈ 18.15 m³/min |
| 145 psig (≈ 10 bar) | 509 cfm | ≈ 14.41 m³/min |
Values published by the manufacturer, at its reference conditions; no interpolation. “≈” = converted from another published unit.
Comparable models
Compare side by side| Model | Flow | At pressure | Power | Market |
|---|---|---|---|---|
| ELGi EG 110 (VSD) | 274 to 649 cfm | 8 bar (≈ 116 psig) | 150 hp | Worldwide |
| Sullair LS90V | 625 cfm | 110 psig (≈ 7.6 bar) | 125 hp | North America |
| Atlas Copco GA 110 VSD+ 8.5 bar (125 psi) | 206 to 727 cfm | 132 psig (≈ 9.1 bar) | 150 hp | Worldwide |
| FINI K-MAX TS 90-08 VS | 222 to 675 cfm | 8 bar (≈ 116 psig) | ≈ 121 hp | Europe / international |
| ALUP ALLEGRO 110 | ≈ 194.9 to 652.6 cfm | 8 bar (≈ 116 psig) | 150 hp | Europe / international |
Same type, flow within ±25% at the same pressure. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other SFC models
Is your product missing?
Request received. We will proceed within 72 hours.