Lubricated rotary screw compressor
Gardner Denver ESM55FC
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Reference flow
- ≈ 392 cfm7.5 bar (≈ 109 psig)
- Power
- ≈ 74 hp55 kW
- Type
- Fixed speed
- Manufacturer
- Gardner Denver
- Line
- ESM 45-55
- Stages
- 1
- Cooling
- Air
- Voltage
- n/a
- Frequency
- 50 Hz
- Brochure market
- Europe / international
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Published flow by pressure
| Pressure | Flow | In m³/min |
|---|---|---|
| 7.5 bar (≈ 109 psig) | ≈ 392 cfm | ≈ 11.1 m³/min |
| 10 bar (≈ 145 psig) | ≈ 353.1 cfm | ≈ 10 m³/min |
| 13 bar (≈ 189 psig) | ≈ 314.3 cfm | ≈ 8.9 m³/min |
Values published by the manufacturer, at its reference conditions; no interpolation. “≈” = converted from another published unit.
Comparable models
Compare side by side| Model | Flow | At pressure | Power | Market |
|---|---|---|---|---|
| ABAC FORMULA M55 A 7,5 | ≈ 364.3 cfm | 7.5 bar (≈ 109 psig) | 75 hp | Europe / international |
| FINI PLUS 75-08 | 431 cfm | 7.5 bar (≈ 109 psig) | 100 hp | Europe / international |
| Kaeser CSD 110 | 382 cfm | 125 psig (≈ 8.6 bar) | n/a | North America |
| Atlas Copco GA 55+ | 381 cfm | 125 psig (≈ 8.6 bar) | 75 hp | Worldwide |
| Quincy QGS-100 | 414.6 cfm | 125 psig (≈ 8.6 bar) | 100 hp | North America |
| ELGi EG 55 | 357 cfm | 8 bar (≈ 116 psig) | 75 hp | Worldwide |
| Chicago Pneumatic CPI75 | 352 cfm | 8 bar (≈ 116 psig) | 75 hp | North America |
| Sullair ST5508 | 348 cfm | 115 psig (≈ 7.9 bar) | 75 hp | North America |
Same type, flow within ±25% at the same pressure. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other ESM 45-55 models
Is your product missing?
Request received. We will proceed within 72 hours.