Lubricated rotary screw compressor
Gardner Denver ESM45FC
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Reference flow
- ≈ 328.4 cfm7.5 bar (≈ 109 psig)
- Power
- ≈ 60 hp45 kW
- Type
- Fixed speed
- Manufacturer
- Gardner Denver
- Line
- ESM 45-55
- Stages
- 1
- Cooling
- Air
- Voltage
- n/a
- Frequency
- 50 Hz
- Brochure market
- Europe / international
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Published flow by pressure
| Pressure | Flow | In m³/min |
|---|---|---|
| 7.5 bar (≈ 109 psig) | ≈ 328.4 cfm | ≈ 9.3 m³/min |
| 10 bar (≈ 145 psig) | ≈ 293.1 cfm | ≈ 8.3 m³/min |
| 13 bar (≈ 189 psig) | ≈ 261.3 cfm | ≈ 7.4 m³/min |
Values published by the manufacturer, at its reference conditions; no interpolation. “≈” = converted from another published unit.
Comparable models
Compare side by side| Model | Flow | At pressure | Power | Market |
|---|---|---|---|---|
| FINI PLUS 56-08 | 328 cfm | 7.5 bar (≈ 109 psig) | 75 hp | Europe / international |
| ABAC FORMULA M55 A 8,5 | ≈ 341.4 cfm | 8.5 bar (≈ 123 psig) | 75 hp | Europe / international |
| Quincy QGS-75 | 320.2 cfm | 125 psig (≈ 8.6 bar) | 75 hp | North America |
| Sullair ST5509 | 341 cfm | 125 psig (≈ 8.6 bar) | 75 hp | North America |
| Hertz Kompressoren HSC 55 | ≈ 341.1 cfm | 7.5 bar (≈ 109 psig) | 75 hp | Worldwide |
| Kaeser CSD 90 | ≈ 312.5 cfm | 7.5 bar (≈ 109 psig) | ≈ 60 hp | Worldwide |
| Chicago Pneumatic CPI75 | 352 cfm | 8 bar (≈ 116 psig) | 75 hp | North America |
| Atlas Copco GA 55 | 354 cfm | 125 psig (≈ 8.6 bar) | 75 hp | Worldwide |
Same type, flow within ±25% at the same pressure. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other ESM 45-55 models
Is your product missing?
Request received. We will proceed within 72 hours.