Lubricated rotary screw compressor
FINI MiniCUBE 2.2-10
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Reference flow
- 9.2 cfm10 bar (≈ 145 psig)
- Power
- 3 hp2.2 kW
- Type
- Fixed speed
- Manufacturer
- FINI
- Line
- MiniCUBE 2.2 kW
- Stages
- 1
- Cooling
- Air
- Voltage
- 400 V 3ph
- Frequency
- 50 Hz
- Brochure market
- Europe / international
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Published flow by pressure
| Pressure | Flow | In m³/min |
|---|---|---|
| 10 bar (≈ 145 psig) | 9.2 cfm | ≈ 0.26 m³/min |
Values published by the manufacturer, at its reference conditions; no interpolation. “≈” = converted from another published unit.
Published configurations
| Designation | Part no. | Configuration | Voltage |
|---|---|---|---|
| MiniCUBE 2.2-10 | V51PK72FNM017 | n/a | 400 V 3ph |
| MiniCUBE 2.2-10 M | V51PK60FNM017 | n/a | 230 V 1ph |
| MiniCUBE 2.2-10-90 | V72PK72FNM001 | Tank-mounted 90 L | 400 V 3ph |
| MiniCUBE 2.2-10-90 M | V72PK60FNM001 | Tank-mounted 90 L | 230 V 1ph |
| MiniCUBE 2.2-10-90 Z | V72PK72FNMZ01 | Tank-mounted 90 L | 400 V 3ph |
| MiniCUBE 2.2-10-90 M Z | V72PK60FNMZ01 | Tank-mounted 90 L | 230 V 1ph |
Comparable models
Compare side by side| Model | Flow | At pressure | Power | Market |
|---|---|---|---|---|
| ABAC SPINN D2.2 10 | ≈ 9.6 cfm | 10 bar (≈ 145 psig) | 3 hp | Europe / international |
| Kaeser SX 3 | ≈ 9.2 cfm | 10 bar (≈ 145 psig) | ≈ 3 hp | Worldwide |
| Hertz Kompressoren HGS 3 | ≈ 9.9 cfm | 10 bar (≈ 145 psig) | 4 hp | Worldwide |
Same type, flow within ±25% at the same pressure. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other MiniCUBE 2.2 kW models
Is your product missing?
Request received. We will proceed within 72 hours.