Lubricated rotary screw compressor
ABAC SPINN D2.2 10
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Reference flow
- ≈ 9.6 cfm10 bar (≈ 145 psig)
- Power
- 3 hp2.2 kW
- Type
- Fixed speed
- Manufacturer
- ABAC
- Line
- SPINN D2.2 kW
- Stages
- 1
- Cooling
- Air
- Voltage
- 230 V 1ph
- Frequency
- 50 Hz
- Brochure market
- Europe / international
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Published flow by pressure
| Pressure | Flow | In m³/min |
|---|---|---|
| 10 bar (≈ 145 psig) | ≈ 9.6 cfm | ≈ 0.27 m³/min |
Values published by the manufacturer, at its reference conditions; no interpolation. “≈” = converted from another published unit.
Published configurations
| Designation | Part no. | Configuration | Voltage |
|---|---|---|---|
| SPINN D2.2 90W 10 MEAA 230/50 | 4152044020 | Tank-mounted 90 L | 230 V 1ph |
| SPINN D2.2 200W 10 MEAA 230/50 | 4152044021 | Tank-mounted 200 L | 230 V 1ph |
| SPINN D2.2 200 10 MEAA 230/50 | 4152044022 | Tank-mounted 200 L | 230 V 1ph |
| SPINN D2.2 90W 10 MEAA 400/50 | 4152044023 | Tank-mounted 90 L | 400 V 3ph |
| SPINN D2.2 200W 10 MEAA 400/50 | 4152044024 | Tank-mounted 200 L | 400 V 3ph |
| SPINN D2.2 200 10 MEAA 400/50 | 4152044025 | Tank-mounted 200 L | 400 V 3ph |
Comparable models
Compare side by side| Model | Flow | At pressure | Power | Market |
|---|---|---|---|---|
| FINI MiniCUBE 2.2-10 | 9.2 cfm | 10 bar (≈ 145 psig) | 3 hp | Europe / international |
| Hertz Kompressoren HGS 3 | ≈ 9.9 cfm | 10 bar (≈ 145 psig) | 4 hp | Worldwide |
| Kaeser SX 3 | ≈ 9.2 cfm | 10 bar (≈ 145 psig) | ≈ 3 hp | Worldwide |
Same type, flow within ±25% at the same pressure. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Is your product missing?
Request received. We will proceed within 72 hours.