Lubricated rotary screw compressor

FINI K-MAX 90-10 VS PM

Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.

Reference flow: 88 to 473 cfm10 bar (≈ 145 psig)
Power: 125 hp90 kW
Type: Variable speed (VSD)
Manufacturer: FINI
Line: K-MAX / K-MAX PM 18.5-90 kW
Stages: 1
Cooling: Air
Voltage: n/a
Frequency: n/a
Brochure market: Europe / international
CSA: n/a
CRN: n/a
Source: Manufacturer’s page

Published flow by pressure

Pressure	Flow	In m³/min
10 bar (≈ 145 psig)	88 to 473 cfm	≈ 2.49 to 13.39 m³/min

Values published by the manufacturer, at its reference conditions; no interpolation. “≈” = converted from another published unit.

Comparable models

Compare side by side

Model	Flow	At pressure	Power	Market
Gardner Denver VS55FC	≈ 88.3 to 390.9 cfm	6 to 10 bar (≈ 87 to 145 psig)	≈ 74 hp	Europe / international
ALUP ALLEGRO 110	≈ 169.5 to 561.5 cfm	10 bar (≈ 145 psig)	150 hp	Europe / international
ELGi EG 90 (VSD)	223 to 470 cfm	10 bar (≈ 145 psig)	125 hp	Worldwide
Kaeser SFC 75S	440 cfm	145 psig (≈ 10 bar)	n/a	North America
Sullair LS90V	512 cfm	150 psig (≈ 10.3 bar)	125 hp	North America

Same type, flow within ±25% at the same pressure. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.

Is your product missing?

FINI K-MAX 90-10 VS PM

Published flow by pressure

Comparable models

Other K-MAX / K-MAX PM 18.5-90 kW models