Lubricated rotary screw compressor

FINI K-MAX 90-08

Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.

Reference flow: 562 cfm7.5 bar (≈ 109 psig)
Power: 125 hp90 kW
Type: Fixed speed
Manufacturer: FINI
Line: K-MAX / K-MAX PM 18.5-90 kW
Stages: 1
Cooling: Air
Voltage: n/a
Frequency: n/a
Brochure market: Europe / international
CSA: n/a
CRN: n/a
Source: Manufacturer’s page

Published flow by pressure

Pressure	Flow	In m³/min
7.5 bar (≈ 109 psig)	562 cfm	≈ 15.91 m³/min

Values published by the manufacturer, at its reference conditions; no interpolation. “≈” = converted from another published unit.

Comparable models

Compare side by side

Model	Flow	At pressure	Power	Market
Sullair LS90 (CE)	≈ 586.2 cfm	8 bar (≈ 116 psig)	≈ 121 hp	Europe / international
ALUP LARGO 110	≈ 652.6 cfm	8 bar (≈ 116 psig)	150 hp	Europe / international
ABAC FORMULA M75 A 7,5	≈ 466.2 cfm	7.5 bar (≈ 109 psig)	100 hp	Europe / international
ELGi EG 90P	553 cfm	8 bar (≈ 116 psig)	125 hp	Worldwide
Atlas Copco GA 90+	574 cfm	125 psig (≈ 8.6 bar)	125 hp	Worldwide
Chicago Pneumatic CPI120	574 cfm	8 bar (≈ 116 psig)	120 hp	North America
Kaeser CSD 145	548 cfm	125 psig (≈ 8.6 bar)	n/a	North America
Gardner Denver L90	579.3 acfm	110 psig (≈ 7.6 bar)	125 hp	Worldwide

Same type, flow within ±25% at the same pressure. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.

Is your product missing?

FINI K-MAX 90-08

Published flow by pressure

Comparable models

Other K-MAX / K-MAX PM 18.5-90 kW models